{ "currentVersion": 11.3, "cimVersion": "3.3.0", "id": 22, "name": "Landslide Compilation", "type": "Feature Layer", "description": "This feature class contains landslides compiled from a variety of sources, spanning the past few decades. The Landslide Compilation contains landslides from the following sources: (1) Landslides that are mapped within 1:24,000-scale geologic mapping (not statewide) and our statewide 1:100,000-scale geologic map compilation; (2) a miscellaneous compilation of pre-existing landslide data from several sources, including the Washington Geological Survey, the Department of Natural Resources\u2019 Forest Practices Division, and other federal and private entities; (3) landslides mapped as part of Watershed Analysis efforts for the Forest Practices Board; (4) reconnaissance-scale mapping of landslides associated with significant landslide events; and (5) a study of near-shore landforms along the Salish Sea.1:24,000-scale and 1:100,000-scale Landslides from Geologic Mappings how landslides that were extracted from 1:24,000- and 1:100,000-scale geologic maps. Landslide mapping was not the primary purpose of these projects, and the absence of a mapped landslide in a particular location does not suggest that no landslide exists or that there is no landslide risk. Also, due to the scale of the final mapping products, landslides with deposits too small to be identified in any included scale of geologic mapping (for example, debris flows, debris avalanches, rock topples, etc.) are not typically included. Only partial coverage exists for landslides mapped at 1:24,000 scale. 1:100,000-scale mapping covers the entire state.Miscellaneous Landslide Mapping is compiled landslide data from many sources focused on landslide mapping. Each project has its own protocol and methods, so it is up to the user to determine how best to interpret the landslide data. To avoid the risk of misinterpretation, invalid results, and erroneous conclusions, users should consider original map scale, collection methodology, original mapping purpose, currency of data, and any other conditions specific to every data element and each dataset as a whole.Watershed Analysis Landslide Mapping polygons were created to support forest practices rules in identification of unstable slopes in various watersheds throughout the state. Rule-identified landform mapping was conducted using aerial photographs, maps (including geology, soil, and topographic), field observations, and limited lidar. Landforms were identified and mapped using a Watershed Analysis or the Landslide Hazard Zonation Protocol. All rule-identified landforms are not shown; only areas identified as landslides in the original watershed analyses are included in this data.Reconnaissance-Scale Landslide Mapping is compiled landslides mapped from surveys immediately following widespread rain or rain-on-snow events in Washington. Mapping techniques for these large-scale surveys vary between aerial surveys from small aircraft, aerial photography, or lidar identification, with minimal field verification.The Salish Sea Landforms identifies landforms along 2,200 miles of Salish Sea shoreline that have characteristics of deep-seated landslides, but lack the thorough investigation necessary to classify these landforms as landslides. All landforms in this layer were identified using historic aerial imagery and 3- to 6-foot LiDAR digital elevation models (DEM). Based on interpretation of LiDAR derivatives (such as hill shades, contour lines, and slope gradient) and aerial imagery, observations of geomorphic features representative of a deep-seated landslide were delineated in a GIS. Due to the method of data collection and the certainty of the data, this dataset should not be confused with a landslide inventory, which typically undergoes a thorough, historic aerial imagery analysis, field validation, and peer review. Landslides from various projects may or may not have used lidar for landslide identification. Landslides in this compilation are mapped at various scales and with varied purpose. Many of these compilation layers are not statewide in extent \u2013 the absence of a mapped landslide in a particular location does not suggest that no landslide exists or that there is no landslide risk.To avoid the risk of misinterpretation, invalid results, and erroneous conclusions, users must consider original map scale, collection methodology, currency of data, and any other conditions specific to every data element and each dataset as a whole. This dataset is not intended as a substitute for a detailed investigation of potential slope instability by a qualified practitioner. Site-specific analysis may give results that differ from those displayed on the map.In areas where the Landslide Compilation is overlapped by the lidar-based Landslide Inventory, the overlapping zones have been attributed as \u2018superseded.\u2019 These layers are not displayed on the portal but are available in the GIS download of the Landslide Compilation.", "geometryType": "esriGeometryPolygon", "sourceSpatialReference": { "wkid": 2927, "latestWkid": 2927, "xyTolerance": 0.003280833333333333, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -117498300, "falseY": -98850300, "xyUnits": 3048.0060960121928, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 }, "copyrightText": "", "parentLayer": { "id": 13, "name": "Other Compiled Landslide Mapping" }, "subLayers": [], "minScale": 0, "maxScale": 0, "referenceScale": 0.0, "drawingInfo": { "renderer": { "type": "simple", "symbol": { "type": "esriSFS", "style": "esriSFSSolid", "color": [ 214, 157, 188, 255 ], "outline": { "type": "esriSLS", "style": "esriSLSSolid", "color": [ 110, 110, 110, 255 ], "width": 0.7 } } }, "scaleSymbols": true, "transparency": 40, "labelingInfo": null }, "defaultVisibility": true, "extent": { "xmin": 608063.0000561327, "ymin": 88562.00016106665, "xmax": 2534531.0001308024, "ymax": 1347674.6249753982, "spatialReference": { "wkid": 2927, "latestWkid": 2927, "xyTolerance": 0.003280833333333333, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -117498300, "falseY": -98850300, "xyUnits": 2048, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "hasAttachments": false, "htmlPopupType": "esriServerHTMLPopupTypeAsHTMLText", "displayField": "LANDSLIDE_ID", "typeIdField": null, "subtypeFieldName": null, "subtypeField": null, "defaultSubtypeCode": null, "fields": [ { "name": "OBJECTID", "type": "esriFieldTypeOID", "alias": "OBJECTID", "domain": null }, { "name": "Shape", "type": "esriFieldTypeGeometry", "alias": "Shape", "domain": null }, { "name": "LANDSLIDE_ID", "type": "esriFieldTypeInteger", "alias": "Landslide ID", "domain": null }, { "name": "LANDSLIDE_TYPE", "type": "esriFieldTypeString", "alias": "Landslide Type", "length": 100, "domain": { "type": "codedValue", "name": "landslide type", "description": "Description of landslide types.", "codedValues": [ { "name": "Shallow undifferentiated", "code": "Shallow undifferentiated" }, { "name": "Debris flow", "code": "Debris flow" }, { "name": "Debris slide and avalanches", "code": "Debris slide and avalanches" }, { "name": "Lateral spreads", "code": "Lateral spreads" }, { "name": "Block fall or topple", "code": "Block fall or topple" }, { "name": "Deep-seated undifferentiated", "code": "Deep-seated undifferentiated" }, { "name": "Deep-seated earthflow", "code": "Deep-seated earthflow" }, { "name": "Deep-seated translational", "code": "Deep-seated translational" }, { "name": "Deep-seated rotational", "code": "Deep-seated rotational" }, { "name": "Deep-seated composite", "code": "Deep-seated composite" }, { "name": "Megalandslide/ Sturzstrom", "code": "Megalandslide/ Sturzstrom" }, { "name": "Hyperconcentrated flows", "code": "Hyperconcentrated flows" }, { "name": "Unknown", "code": "Unknown" } ], "mergePolicy": "esriMPTDefaultValue", "splitPolicy": "esriSPTDefaultValue" } }, { "name": "DSLS_MORPHOLOGY", "type": "esriFieldTypeString", "alias": "DSLS Morphology", "length": 30, "domain": { "type": "codedValue", "name": "DSLS morphology", "description": "Textual description of deep-seated landslide morphology", "codedValues": [ { "name": "Activated, reactivated, recent", "code": "Activated, reactivated, recent" }, { "name": "Dormant distinct", "code": "Dormant distinct" }, { "name": "Dormant indistinct", "code": "Dormant indistinct" }, { "name": "Dormant relict", "code": "Dormant relict" }, { "name": "Abandoned or stabilized", "code": "Abandoned or stabilized" }, { "name": "Unknown", "code": "Unknown" } ], "mergePolicy": "esriMPTDefaultValue", "splitPolicy": "esriSPTDefaultValue" } }, { "name": "LANDSLIDE_NAME", "type": "esriFieldTypeString", "alias": "Landslide Name", "length": 50, "domain": null }, { "name": "GRADIENT_DEGREES", "type": "esriFieldTypeSmallInteger", "alias": "Gradient (degrees)", "domain": null }, { "name": "GRADIENT_METHOD", "type": "esriFieldTypeString", "alias": "Gradient Method", "length": 50, "domain": { "type": "codedValue", "name": "gradient method", "description": "How the landslide gradient was determined", "codedValues": [ { "name": "Gradient degrees determined in the field", "code": "Gradient degrees determined in the field" }, { "name": "Gradient degrees determined from Lidar", "code": "Gradient degrees determined from Lidar" }, { "name": "Gradient degrees determined from a DEM (10m)", "code": "Gradient degrees determined from a DEM (10m)" }, { "name": "Gradient degrees determined from a DEM (30m)", "code": "Gradient degrees determined from a DEM (30m)" }, { "name": "Gradient degrees determined from orthophotos", "code": "Gradient degrees determined from orthophotos" }, { "name": "Gradient degrees determined from unknown source", "code": "Gradient degrees determined from unknown source" } ], "mergePolicy": "esriMPTDefaultValue", "splitPolicy": "esriSPTDefaultValue" } }, { "name": "SLOPE_MORPHOLOGY", "type": "esriFieldTypeString", "alias": "Slope Morphology", "length": 20, "domain": { "type": "codedValue", "name": "slope morphology", "description": "Description of the slope morphology", "codedValues": [ { "name": "Concave, convergent", "code": "Concave, convergent" }, { "name": "Concave-planar", "code": "Concave-planar" }, { "name": "Planar", "code": "Planar" }, { "name": "Planar-convex", "code": "Planar-convex" }, { "name": "Convex, divergent", "code": "Convex, divergent" }, { "name": "Irregular", "code": "Irregular" }, { "name": "Unknown", "code": "Unknown" } ], "mergePolicy": "esriMPTDefaultValue", "splitPolicy": "esriSPTDefaultValue" } }, { "name": "ASPECT", "type": "esriFieldTypeSmallInteger", "alias": "Aspect", "domain": null }, { "name": "GEOLOGIC_UNIT_LABEL", "type": "esriFieldTypeString", "alias": "Geologic Unit Label", "length": 15, "domain": null }, { "name": "STRUCTURE_ASSOCIATION", "type": "esriFieldTypeString", "alias": "Structure Association", "length": 20, "domain": { "type": "codedValue", "name": "structure associated", "description": "Description of the geologic structure of the landslide", "codedValues": [ { "name": "Bedding planes", "code": "Bedding planes" }, { "name": "Interbeds", "code": "Interbeds" }, { "name": "Other", "code": "Other" }, { "name": "Unknown", "code": "Unknown" } ], "mergePolicy": "esriMPTDefaultValue", "splitPolicy": "esriSPTDefaultValue" } }, { "name": "LANDSLIDE_TRIGGER_EVENT", "type": "esriFieldTypeString", "alias": "Landslide Trigger Event", "length": 50, "domain": null }, { "name": "LANDSLIDE_CERTAINTY", "type": "esriFieldTypeString", "alias": "Landslide Certainty", "length": 15, "domain": { "type": "codedValue", "name": "landslide certainty", "description": "Likelihood of the existence of the landslide.", "codedValues": [ { "name": "Certain", "code": "Certain" }, { "name": "Probable", "code": "Probable" }, { "name": "Questionable", "code": "Questionable" }, { "name": "Unknown", "code": "Unknown" } ], "mergePolicy": "esriMPTDefaultValue", "splitPolicy": "esriSPTDefaultValue" } }, { "name": "LANDSLIDE_DATE", "type": "esriFieldTypeDate", "alias": "Landslide Date", "length": 8, "domain": null }, { "name": "LANDSLIDE_LIMIT_DATE", "type": "esriFieldTypeDate", "alias": "Landslide Limit Date", "length": 8, "domain": null }, { "name": "FIELD_CHECK", "type": "esriFieldTypeString", "alias": "Field Check", "length": 80, "domain": { "type": "codedValue", "name": "field check", "description": "Description of whether the landslide has been field-checked by a landslide professional", "codedValues": [ { "name": "Field checked by a landslide professional", "code": "Field checked by a landslide professional" }, { "name": "Field checked by a non-landslide professional", "code": "Field checked by a non-landslide professional" }, { "name": "Field checked from a plane, boat, or other location", "code": "Field checked from a plane, boat, or other location" }, { "name": "Not checked in the field", "code": "Not checked in the field" }, { "name": "Not known if field checked", "code": "Not known if field checked" } ], "mergePolicy": "esriMPTDefaultValue", "splitPolicy": "esriSPTDefaultValue" } }, { "name": "INFRASTRUCTURE_DAMAGE", "type": "esriFieldTypeString", "alias": "Infrastructure Damage", "length": 90, "domain": { "type": "codedValue", "name": "infrastructure damage", "description": "Description of infrastructure damage caused by the landslide.", "codedValues": [ { "name": "Landslide has caused structure damage", "code": "Landslide has caused structure damage " }, { "name": "Landslide has probably caused structure damage due to location adjacent to structure", "code": "Landslide has probably caused structure damage due to location adjacent to structure " }, { "name": "Landslide may have caused structure damage but evidence not conclusive", "code": "Landslide may have caused structure damage but evidence not conclusive" }, { "name": "Landslide poses a definite structure damage threat", "code": "Landslide poses a definite structure damage threat" }, { "name": "Landslide has probable structure damage threat due to location adjacent to structure", "code": "Landslide has probable structure damage threat due to location adjacent to structure " }, { "name": "Landslide poses a questionable structure damage threat", "code": "Landslide poses a questionable structure damage threat" }, { "name": "Undetermined", "code": "Undetermined" } ], "mergePolicy": "esriMPTDefaultValue", "splitPolicy": "esriSPTDefaultValue" } }, { "name": "LAND_USE", "type": "esriFieldTypeString", "alias": "Land Use", "length": 30, "domain": { "type": "codedValue", "name": "land use (compilation)", "description": "Description of the land use where the landslide occurred, for landslide compilation features only.", "codedValues": [ { "name": "Forestry related activities", "code": "Forestry related activities" }, { "name": "Road, railroad, trail", "code": "Road, railroad, trail" }, { "name": "Urban development", "code": "Urban development" }, { "name": "Agriculture and range land", "code": "Agriculture and range land" }, { "name": "Undisturbed", "code": "Undisturbed" }, { "name": "Forest fire impacted land", "code": "Forest fire impacted land" }, { "name": "Unknown", "code": "Unknown" } ], "mergePolicy": "esriMPTDefaultValue", "splitPolicy": "esriSPTDefaultValue" } }, { "name": "LOCATION_CONFIDENCE", "type": "esriFieldTypeString", "alias": "Location Confidence", "length": 20, "domain": { "type": "codedValue", "name": "confidence (compilation)", "description": "Confidence of mapped features (for location and data confidence in compilation)", "codedValues": [ { "name": "High", "code": "High" }, { "name": "Moderate-High", "code": "Moderate-High" }, { "name": "Moderate", "code": "Moderate" }, { "name": "Low-Moderate", "code": "Low-Moderate" }, { "name": "Low", "code": "Low" } ], "mergePolicy": "esriMPTDefaultValue", "splitPolicy": "esriSPTDefaultValue" } }, { "name": "DATA_CONFIDENCE", "type": "esriFieldTypeString", "alias": "Data Confidence", "length": 20, "domain": { "type": "codedValue", "name": "confidence (compilation)", "description": "Confidence of mapped features (for location and data confidence in compilation)", "codedValues": [ { "name": "High", "code": "High" }, { "name": "Moderate-High", "code": "Moderate-High" }, { "name": "Moderate", "code": "Moderate" }, { "name": "Low-Moderate", "code": "Low-Moderate" }, { "name": "Low", "code": "Low" } ], "mergePolicy": "esriMPTDefaultValue", "splitPolicy": "esriSPTDefaultValue" } }, { "name": "COMMENTS", "type": "esriFieldTypeString", "alias": "Comments", "length": 255, "domain": null }, { "name": "FEATURE_SOURCE", "type": "esriFieldTypeString", "alias": "Feature Source", "length": 60, "domain": { "type": "codedValue", "name": "feature source", "description": "Name of the source database from which the landslide feature was obtained", "codedValues": [ { "name": "Geologic Mapping, 1:24,000-scale", "code": "Geologic Mapping, 1:24,000-scale" }, { "name": "Geologic Mapping, 1:100,000-scale", "code": "Geologic Mapping, 1:100,000-scale" }, { "name": "Reconnaissance-level Landslide Mapping", "code": "Reconnaissance-level Landslide Mapping" }, { "name": "Miscellaneous Landslide Mapping", "code": "Miscellaneous Landslide Mapping" }, { "name": "Watershed Analysis Landslide Mapping", "code": "Watershed Analysis Landslide Mapping" }, { "name": "Salish Sea Landforms", "code": "Salish Sea Landforms" } ], "mergePolicy": "esriMPTDefaultValue", "splitPolicy": "esriSPTDefaultValue" } }, { "name": "SOURCE_INFORMATION", "type": "esriFieldTypeString", "alias": "Source Information", "length": 700, "domain": null }, { "name": "SOURCE_DB_FEATURE_ID", "type": "esriFieldTypeInteger", "alias": "Source DB Feature ID", "domain": null }, { "name": "SOURCE_URL", "type": "esriFieldTypeString", "alias": "Source URL", "length": 255, "domain": null }, { "name": "DISPLAY_ON_PORTAL", "type": "esriFieldTypeString", "alias": "Display on Portal", "length": 5, "domain": { "type": "codedValue", "name": "y/n", "description": "Yes or no", "codedValues": [ { "name": "Yes", "code": "Yes" }, { "name": "No", "code": "No" } ], "mergePolicy": "esriMPTDefaultValue", "splitPolicy": "esriSPTDuplicate" } }, { "name": "CHANGE_TYPE", "type": "esriFieldTypeString", "alias": "Change Type", "length": 10, "domain": { "type": "codedValue", "name": "change type", "description": "Type of change made to feature", "codedValues": [ { "name": "Added", "code": "Added" }, { "name": "Deleted", "code": "Deleted" }, { "name": "Modified", "code": "Modified" }, { "name": "Superseded", "code": "Superseded" } ], "mergePolicy": "esriMPTDefaultValue", "splitPolicy": "esriSPTDefaultValue" } }, { "name": "CHANGE_DATE", "type": "esriFieldTypeDate", "alias": "Change Date", "length": 8, "domain": null }, { "name": "CHANGE_DESCRIPTION", "type": "esriFieldTypeString", "alias": "Change Description", "length": 255, "domain": null }, { "name": "Shape_Length", "type": "esriFieldTypeDouble", "alias": "Shape_Length", "domain": null }, { "name": "Shape_Area", "type": "esriFieldTypeDouble", "alias": "Shape_Area", "domain": null } ], "geometryField": { "name": "Shape", "type": "esriFieldTypeGeometry", "alias": "Shape" }, "indexes": [ { "name": "FDO_OBJECTID", "fields": "OBJECTID", "isAscending": true, "isUnique": true, "description": "" }, { "name": "FDO_Shape", "fields": "Shape", "isAscending": true, "isUnique": false, "description": "" } ], "subtypes": [], "relationships": [], "canModifyLayer": true, "canScaleSymbols": false, "hasLabels": false, "capabilities": "Map,Query,Data", "maxRecordCount": 2000, "supportsStatistics": true, "supportsExceedsLimitStatistics": true, "supportsAdvancedQueries": true, "supportedQueryFormats": "JSON, geoJSON, PBF", "isDataVersioned": false, "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true}, "useStandardizedQueries": true, "supportedSpatialRelationships": [ "esriSpatialRelIntersects", "esriSpatialRelContains", "esriSpatialRelCrosses", "esriSpatialRelEnvelopeIntersects", "esriSpatialRelIndexIntersects", "esriSpatialRelOverlaps", "esriSpatialRelTouches", "esriSpatialRelWithin", "esriSpatialRelRelation" ], "advancedQueryCapabilities": { "useStandardizedQueries": true, "supportsStatistics": true, "supportsPercentileStatistics": true, "supportsHavingClause": true, "supportsOrderBy": true, "supportsDistinct": true, "supportsCountDistinct": true, "supportsAdvancedQueryRelated": true, "supportsQueryRelatedPagination": true, "supportsPagination": true, "supportsLod": false, "supportsQueryWithLodSR": false, "supportsTrueCurve": true, "supportsQueryWithDatumTransformation": true, "supportsReturningQueryExtent": true, "supportsQueryWithDistance": true, "supportsSqlExpression": true, "supportsTimeRelation": true, "supportsSqlFormat": false, "supportsQueryAnalytic": false, "supportsCurrentUserQueries": true }, "supportsDatumTransformation": true, "dateFieldsTimeReference": null, "preferredTimeReference": null, "datesInUnknownTimezone": false, "hasGeometryProperties": true, "geometryProperties": { "shapeAreaFieldName": "Shape_Area", "shapeLengthFieldName": "Shape_Length", "units": "esriFeet", "mapUnits": {"uwkid": 9003} }, "hasMetadata": true, "isDataArchived": false, "archivingInfo": { "supportsQueryWithHistoricMoment": false, "startArchivingMoment": -1 }, "supportsCoordinatesQuantization": true, "supportsDynamicLegends": true, "serviceItemId": "dfdbc1074f5a4f6f858858e1ca2a61e5" }