{ "currentVersion": 10.91, "cimVersion": "2.9.0", "serviceDescription": "

Geological data that are used for a broad range of academic and practical applications, including growth-management planning, dam safety, hazard and risk assessment, water resource appraisals, resource use and protection, education, recreation, and scientific research.<\/span><\/p>

This dataset portrays the geology of Washington State at a scale of 1:100,000 (1 inch equals approximately 1.58 miles). The purpose is to make the geology of the state available as a seamless dataset for use in regional spatial analyses and other digital applications and for providing a framework for planning and land management and evaluating geologic hazards and resources. It was prepared in cooperation with the U. S. Geological Survey (USGS) National Geologic Mapping Program.<\/span><\/p>

This service consists of 12 feature classes and 1 table containing 1:100,000-scale geologic mapping for Washington State. Feature classes include: attitude_points (structural data), contacts, dikes (dikes and sills), faults, folds (fold data), geologic dates (from sampled locations), geologic_unit_polygons (geologic unit polygon data), map_index (spatial location of all 1:100,000 scale data and their sources), map_line (linear geologic data), map_point (geologic point data), misc_polygons (miscellaneous polygon data), and volcanic_vents (vent data). Also included within the geodatabase is a related unit description table, unit_descriptions, which defines each unit as reported by the author of the published map, and provides age, lithology, and full unit descriptions.<\/span><\/p><\/div><\/div><\/div>", "mapName": "100k Surface Geology", "description": "

Geological data that are used for a broad range of academic and practical applications, including growth-management planning, dam safety, hazard and risk assessment, water resource appraisals, resource use and protection, education, recreation, and scientific research.<\/SPAN><\/P>

This dataset portrays the geology of Washington State at a scale of 1:100,000 (1 inch equals approximately 1.58 miles). The purpose is to make the geology of the state available as a seamless dataset for use in regional spatial analyses and other digital applications and for providing a framework for planning and land management and evaluating geologic hazards and resources. It was prepared in cooperation with the U. S. Geological Survey (USGS) National Geologic Mapping Program.<\/SPAN><\/P>

This service consists of 12 feature classes and 1 table containing 1:100,000-scale geologic mapping for Washington State. Feature classes include: attitude_points (structural data), contacts, dikes (dikes and sills), faults, folds (fold data), geologic dates (from sampled locations), geologic_unit_polygons (geologic unit polygon data), map_index (spatial location of all 1:100,000 scale data and their sources), map_line (linear geologic data), map_point (geologic point data), misc_polygons (miscellaneous polygon data), and volcanic_vents (vent data). Also included within the geodatabase is a related unit description table, unit_descriptions, which defines each unit as reported by the author of the published map, and provides age, lithology, and full unit descriptions.<\/SPAN><\/P><\/DIV><\/DIV><\/DIV>", "copyrightText": "Washington Division of Geology and Earth Resources, 2016, Surface geology, 1:100,000--GIS data, November 2016: Washington Division of Geology and Earth Resources Digital Data Series DS-18, version 3.1, previously released June 2010. http://www.dnr.wa.gov/publications/ger_portal_surface_geology_100k.zip", "supportsDynamicLayers": true, "layers": [ { "id": 19, "name": "Dikes 100K", "parentLayerId": -1, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolyline", "supportsDynamicLegends": true }, { "id": 20, "name": "Attitude Measurements 100K", "parentLayerId": -1, "defaultVisibility": false, "subLayerIds": null, "minScale": 1000000, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPoint", "supportsDynamicLegends": true }, { "id": 21, "name": "Geologic Unit Points 100K", "parentLayerId": -1, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPoint", "supportsDynamicLegends": true }, { "id": 23, "name": "Linear Geologic Features 100K", "parentLayerId": -1, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolyline", "supportsDynamicLegends": true }, { "id": 25, "name": "Folds 100K", "parentLayerId": -1, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolyline", "supportsDynamicLegends": true }, { "id": 26, "name": "Faults 100K", "parentLayerId": -1, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolyline", "supportsDynamicLegends": true }, { "id": 27, "name": "Contacts 100K", "parentLayerId": -1, "defaultVisibility": false, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolyline", "supportsDynamicLegends": true }, { "id": 28, "name": "Geologic Units 100K", "parentLayerId": -1, "defaultVisibility": true, "subLayerIds": null, "minScale": 0, "maxScale": 0, "type": "Feature Layer", "geometryType": "esriGeometryPolygon", "supportsDynamicLegends": true } ], "tables": [], "spatialReference": { "wkid": 2927, "latestWkid": 2927, "xyTolerance": 0.003280833333333333, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -117498300, "falseY": -98850300, "xyUnits": 3048.0060960121928, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 }, "singleFusedMapCache": false, "initialExtent": { "xmin": -394296.7959832256, "ymin": -513777.5247409005, "xmax": 3933080.3106389367, "ymax": 2400435.0027893777, "spatialReference": { "wkid": 2927, "latestWkid": 2927, "xyTolerance": 0.003280833333333333, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -117498300, "falseY": -98850300, "xyUnits": 3048.0060960121928, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "fullExtent": { "xmin": 575944.6197392773, "ymin": 81876.85637917714, "xmax": 2551197.7459967732, "ymax": 1355862.2480358535, "spatialReference": { "wkid": 2927, "latestWkid": 2927, "xyTolerance": 0.003280833333333333, "zTolerance": 0.001, "mTolerance": 0.001, "falseX": -117498300, "falseY": -98850300, "xyUnits": 3048.0060960121928, "falseZ": -100000, "zUnits": 10000, "falseM": -100000, "mUnits": 10000 } }, "datesInUnknownTimezone": false, "minScale": 0, "maxScale": 0, "units": "esriFeet", "supportedImageFormatTypes": "PNG32,PNG24,PNG,JPG,DIB,TIFF,EMF,PS,PDF,GIF,SVG,SVGZ,BMP", "documentInfo": { "Title": "100k Surface Geology", "Author": "", "Comments": "

Geological data that are used for a broad range of academic and practical applications, including growth-management planning, dam safety, hazard and risk assessment, water resource appraisals, resource use and protection, education, recreation, and scientific research.<\/SPAN><\/P>

This dataset portrays the geology of Washington State at a scale of 1:100,000 (1 inch equals approximately 1.58 miles). The purpose is to make the geology of the state available as a seamless dataset for use in regional spatial analyses and other digital applications and for providing a framework for planning and land management and evaluating geologic hazards and resources. It was prepared in cooperation with the U. S. Geological Survey (USGS) National Geologic Mapping Program.<\/SPAN><\/P>

This service consists of 12 feature classes and 1 table containing 1:100,000-scale geologic mapping for Washington State. Feature classes include: attitude_points (structural data), contacts, dikes (dikes and sills), faults, folds (fold data), geologic dates (from sampled locations), geologic_unit_polygons (geologic unit polygon data), map_index (spatial location of all 1:100,000 scale data and their sources), map_line (linear geologic data), map_point (geologic point data), misc_polygons (miscellaneous polygon data), and volcanic_vents (vent data). Also included within the geodatabase is a related unit description table, unit_descriptions, which defines each unit as reported by the author of the published map, and provides age, lithology, and full unit descriptions.<\/SPAN><\/P><\/DIV><\/DIV><\/DIV>", "Subject": "1:100,000-scale surface geology coverage for the state of Washington.", "Category": "", "AntialiasingMode": "Fast", "TextAntialiasingMode": "Force", "Version": "2.9.0", "Keywords": "geologic unit,geologic mapping,map coverage,WA" }, "supportsQueryDomains": true, "capabilities": "Query,Map,Data", "supportedQueryFormats": "JSON, geoJSON, PBF", "exportTilesAllowed": false, "referenceScale": 0.0, "supportsDatumTransformation": true, "archivingInfo": {"supportsHistoricMoment": false}, "supportsClipping": true, "supportsSpatialFilter": true, "supportsTimeRelation": true, "supportsQueryDataElements": true, "maxRecordCount": 2000, "maxImageHeight": 4096, "maxImageWidth": 4096, "supportedExtensions": "", "serviceItemId": "898f96dcf141402d8af59d34b33fff0b" }